Loading ...
Loading ...
Loading ...
CLEANING
• Clean engine, battery, seat, finish, etc.
of all foreign matter.
• Keep finished surfaces and wheels free
of all gasoline, oil, etc.
• Protect painted surfeces with automo-
tive type wax.
We do not recommend usinga garden
hose to clean your tractor unless the
electrical system, muffler,air filterand
carburetor are covered to keep water out.
Water in engine can result in a shortened
engine life.
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
brake pedal fully and set parking brake.
2. Place attachment clutch in =DISENGAGED" position.
3. Turn ignition key =OFF_ and remove key.
4, Make sure the blades and all moving pads have completely stopped.
5. Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE MOWER
1. Place attachment clutch in "DISEN-
GAGED" position.
2. If equipped, turn height adjustment
knob to lowest setting.
3. Lower mower to its lowest position.
4. Disengage belt tension rod from lock
bracket.
CAUTION: Rod isspring loaded. Have
a tight grip on rod and release slowly.
5. Remove retainer spring holding anti-
swaybar to chassis bracket and
disengage anti-swaybar from bracket.
6. Remove four retainer springs from
front plate assembly and remove
plate.
Suspension
BeltTensionRod
(Disengaged\ ,.
Position) _'
Chassis
7. Remove retainer springsfrom
suspension arms at deck and disen-
gage arms from deck.
8. Raise attachment riftto its highest
position.
9. Slide mower forward and remove belt
from electric clutch pulley.
1O.Slide mower out from under right side
oftractor.
TO INSTALL MOWER
Follow procedure described in =INSTALL
MOWER AND DRIVE BELT"inthe
Assembly section of this manual.
Electric
Clutch Pulley
Front Mower
Bracket
Front
Plate
Retainer
Anti-Sway
Bar
Retainer Springs
Retainer Springs
(Bo_ Sides)
_Front Mower
Bracket
22
Loading ...
Loading ...
Loading ...