Loading ...
Loading ...
Loading ...
14 EN
EN
Control and operation
2021 08/2021
4.5.3. Setting up the RDS mode
Set the device as required so that when receiving the given specifi c RDS information
(described above) it reacts appropriately.
Alternative frequencies AF
When AF is turned on (AF ON), the device will monitor reception quality. If it declines, it
will search for abetter quality reception of the same station based on the broadcast data,
and when it fi nds it, it will automatically switch to the strongest signal of the given station.
Traffi c announcements
When the TA function is activated, the device scans for astation broadcasting traffi c
announcements ("TA SEEK"). When it fi nds such astation, it stays tuned to it and the TP
indicator is lit. If reception quality declines, again start ascan for the reception of other
stations with suffi cient quality.
If the TA mode is activated and atraffi c announcement is being broadcast:
–
"TRAFFIC" will appear on the display.
–
when the device is in adifferent operating mode than FM radio, it will temporarily
switch to radio
When the TA function is activated:
–
And you use the buttons to scan for stations, it will always fi nd stations
that provide TA broadcasts.
–
And astation with TP information is tuned, TP is shown on the display.
PTY program – selection
After selecting the PTY mode, the radio will start to scan for corresponding PTY
information and will stop if it detects corresponding PTY information. If the corresponding
PTY information does not exist, the PTY mode will switch back to normal mode.
Loading ...
Loading ...
Loading ...