Loading ...
Loading ...
Loading ...
en Faults and what to do about them
46
Information on the display panel
Display Cause/Remedy
Õ ■ Flashes fast + signal: The door was opened and the water level is too high.
Close the door, continue the programme with A Start/Reload button or
select [ Drain.
■ Flashes slowly: The door lock temperature is too high to open the door. Wait
approx. 30 seconds until the door lock temperature cools down.
•©£ The temperature in the drum is too high. Wait for the appliance running to cool
down the laundry till the •©£ disappears on the display panel, then the door can
be opened.
r ■ Flashes (no water supply): Water tap turned on? Filter in the water supply is
blocked? ~ "Filter in the water supply is blocked" on page 44
Is the supply hose kinked or trapped?
■ Lights up (low water pressure): For information only. This will not affect the
programme progress. The programme duration is extended.
E lights up The childproof lock is activated – deactivate it.
The symbol Û
flashes
Run the Cottons i 90°C programme to clean and care for the drum and the
outer tub.
Notes
■ Run the programme without laundry.
■ Use washing powder or a detergent containing bleach. To prevent foaming,
only use half the amount of detergent recommended by the detergent manu-
facturer. Do not use detergent designed for woollens or delicates.
■ Switching the drum care information signal on/off. ~ Page 40
E:36
alternating with
-10
■ Drain pipe or water drain hose is blocked. Clean the drain pipe and the water
outlet hose.
■ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe
and water drain hose are not kinked or trapped.
■ The drain pump is blocked.
~ "Drain pump is blocked" on page 43
■ The drain hose at the siphon is blocked.
~ "The drain hose at the siphon is blocked" on page 44
■ The water drain hose is connected too high. Install the water outlet hose at a
maximum height of 1 meter.
~ Page 16
E:35
alternating with
-10 (Suitable for spe-
cial models)
There is water in the base trough, the appliance is leaking. Turn off the tap. Call
customer services.
H:95
alternating with
“Ÿš
when programme is
finished
No water detected in drying phase, may get bad drying result.
~ "Filter in the water supply is blocked" on page 44
Loading ...
Loading ...
Loading ...