Loading ...
Loading ...
Loading ...
6
Step 1: Plug the power cord into a properly grounded 110-120 volt AC outlet.
Note: Once plugged in, the control panel will light up for a second and then turn off. You’ll need to press the
POWER Button to turn the dehumidifiers on.
Step 2: Press the POWER button to turn the dehumidifier on. The dehumidifier will run in the default setting of
30% set humidity at low fan speed in the normal DEHUMIDIFY mode. The LCD screen displays the room humidity
and temperature reading.
Note: If the dehumidifier does not run automatically and you see the “FULL BUCKET” icon illuminate, please
remove the water bucket and re-install it properly.
Step 3: Select Mode
1) DEHUMIDIFY mode
In the DEHUMIDIFY mode, the dehumidifier will automatically stop and restart based on the humidity setting,
which is called Humidstat Mode, hence maintaining the room humidity within the range of ±3% of the set point.
For example, the set humidity is 50%, the dehumidifier will automatically stop working when the room humidity
reaches 47%, and then automatically restart when the room humidity raises up to 53%.
NOTE: If you set the target humidity at 30%, the dehumidifier will run continuously until the water bucket is full,
which is called CONTINUOUS Mode.
How to run the dehumidifier in the normal DEHUMIDIFY mode?
· Select Mode: Press the DEHUMIDIFY button once to select the normal DEHUMIDIFY mode. You’ll see the water
droplets icon lights up on the screen.
· Check the room humidity: When no operation on the control panel, the big font number on the LCD screen is
the humidity readout of the inlet air, which is similar to the room humidity level.
· Set your desired humidity: After selecting DEHUMIDIFY mode, press the HUMIDITY button repeatedly to adjust
the set-point of humidity level between 30%-80% in 5% increments. The big font number will flash when
changes are being made. The set humidity needs to be at least 5% lower than the room humidity. After you have
selected the desired value, please wait for 5 seconds until the flashing big font number stops flashing and turns
to statically display the room humidity reading, during which time the setting will be automatically registered.
· Let the dehumidifier run. The dehumidifier will automatically stop when the room humidity reaches the target
RH% or when the water bucket is full.
★ You can also use the SPEED button to change the fan speed to HIGH or LOW. When the fan speed was set to
high, the fan icon will rotate at a higher speed. When the fan speed was set to low, the fan icon will rotate at a
slower speed. Higher fan speed will result in quicker moisture removal.
2) DRY-CLOTHES mode
Press the DRY-CLOTHES button to run the dehumidifier in the DRY-CLOTHES mode. You will see the
DRY-CLOTHES icon light up on the screen. In the DRY-CLOTHES mode, the dehumidifier will run continuously at
high fan speed.
Note: In the DRY-CLOTHES mode, the HUMIDITY button, the SPEED button, and the SWING button are disabled.
Loading ...
Loading ...
Loading ...