Colzer YDA828E 70 Pint Portable Home Dehumidifier for Basements with Continuous Drain Hose Inofia YDA-828E

User Manual - Page 10

For YDA828E.

PDF File Manual, 18 pages, Read Online | Download pdf file

YDA828E photo
Loading ...
Loading ...
Loading ...
7
How to use the DRY-CLOTHES mode better?
· Hang the clothes in a small room; (Maintain a suitable distance between the clothes and the dehumidifier to
make sure no water will drip into the dehumidifier)
· Close the windows and doors;
· Run the dehumidifier at DRY-CLOTHES mode.
3) FAN mode
Press the FAN button to run the dehumidifier in the FAN mode. In the FAN mode, the compressor will not kick in,
only the fan runs. Therefore, in the FAN mode, the HUMIDITY button is disabled. But the SPEED button and the
SWING button are working. So the fan speed and the airflow direction can be adjusted.
Step 4: Shut Off
To shut the dehumidifier down, press the POWER button again.
4. Timer Setting
The TIMER function enables you to either delay AUTO-ON or delay AUTO-OFF the dehumidifier in the choice
from 1 hour to 24 hours.
· Setting an AUTO-ON timer: When the dehumidifier is off, selecting Timer will turn the dehumidifier on in the
hours that will be set.
· Setting an AUTO-OFF timer: When the dehumidifier is running, selecting Timer will turn the dehumidifier off in
the hours that will be set.
Follow the below steps to set the TIMER:
1) Press the TIMER button once, the TIMER icon will light up and small font digital number will turn to display as
00
H
and flash;
2) Press the TIMER button repeatedly to change the delay timer at 1-hour increments, up to 24 hours;
3) After selecting the target timer value, wait for 5 seconds to let the setting be registered automatically when the
TIMER icon and the small font number stop flashing;
4) After TIMER setting finishes, the control will count down the time remaining (8,7,6, etc.) until the dehumidifier
either AUTO-ON or AUTO-OFF.
5) After timer function enabled, pressing the TIMER button again could cancel the timer setting.
Note:
· Before entering AUTO ON timer setting, turn on the dehumidifier to set a target humidity level first. Otherwise,
the humidity maintained will be the same as the previous setting.
· You can only set AUTO ON timer when the dehumidifier is off or set AUTO OFF timer when the dehumidifier is
on, but you will not be able to set both AUTO ON and AUTO OFF timer at the same time.
· The TIMER will ONLY function one time instead of cycling the dehumidifier on or off indefinitely.
· Before entering the TIMER setting, make sure power is being supplied to the dehumidifier.
· Set the timer 00, the timer function will not be activated.
· Once the dehumidifier has been turned ON/OFF manually, the pre-set AUTO ON/OFF timer setting will be
canceled.
Loading ...
Loading ...
Loading ...