Loading ...
Loading ...
Loading ...
Familiarizing yourself with your appliance en-us
11
Note:The image of the control knob is representative. De-
pending on the available settings, the individual control
knobs may have some but not all functions described in
the following chart.
Knob position
off Burner turned off
Electronic ignition
Power levels
hi Highest power level
lo Lowest power level
sim Simmer setting
Burner positions
The markings next to each of the control knobs show
which burner they control.
Burner posi-
tions
Front left burner
Front right burner
Middle burner
Back left burner
Back right burner
Indicator on the control knobs
Each control knob is equipped with an indicator light with
various display functions.
Indicator Meaning
No light Burner turned OFF
Lights up: Red Burner turned ON
Flashing: Red Appliance fault
Call Customer Service.
Slowly flashing: Red Appliance OFF
Residual heat indicator
Dual flame burner control
For dual-flame burners, the inner and outer flames can be
controlled separately.
Power level Meaning
Inner and outer flame on
full power
Outer flame on low power,
inner flame on full power
Inner flame on full power
Inner flame on low power
4.3 Burner cap and burner base placement
The burner caps must be properly placed for the cooktop
to function properly.
If the burner cap is not properly placed, one or more of the
following may occur:
¡ Burner flames are too high
¡ Flames shoot out of the burners
¡ Stainless steel discolorations
¡ Burners do not ignite
¡ Burner flames light unevenly
¡ Burner emits gas odor
WARNING
To prevent flare-ups do not use the cooktop without all
burner caps and all burner grates properly positioned.
CAUTION
To prevent burns, do not touch burner caps or grates while
hot.
▶
Turn the cooktop off and allow the burners to cool.
1
2
3
4
4
3
2
1
1
Burner cap
2
Burner base
3
Thermocouple
4
Igniter
Loading ...
Loading ...
Loading ...