Loading ...
Loading ...
Loading ...
I Connections I
Connectingthe Antenna Cable to the Antenna Terminal
Antenna Connection _For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended. Antenna Mode must be set to TV.
VHF Antenna UHFAntenna
75 Ohm Mixer _
Coaxial Cable _[
Antenna Terminal
(ANT or VHF/UHF)
Coaxial Antenna Plug
Antenna cover removal and fitting
I TC-14LA1/TC-17LA1
Removal 1.Grasp the cover at the
bottom end and initially
remove by pulling slightly
toward yourself.
2.Slowly pull out in the
downward direction.
I TC-20LA1
Removal
1.insert the claws (at 4
points) at the top end.
2.Push the claws in (at 4
points) at the bottom
end.
Fitting Fitting
1.Graspmeopeningandinitially
pullthecoverslightlytowards
yourself to disengage the
claws(at2pointson bo_ the
leftand right).
2.Slowly pull out in the
downward direction.
1.Insert the claws (at 4
points) at the top end.
2.Push the claws in (at 4
points) at the bottom
end.
Note: To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together.
Antenna / Cable Connection
Incoming 75 Ohm Cable from Home Antenna / Cable Company
F-Type Antenna Adapter (not supplied)
ANT (VHF/UHF)
on the Back of the TV
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company,
Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility requirements,
8
Loading ...
Loading ...
Loading ...