Loading ...
Loading ...
Loading ...
nsta ation 8nstructions (continued)
_'_e_ ,_ (continued)
Light The PHots
pilot flame
Quality of Flames
The combustion quality of burner flames needs to be
determined visually.
(A) Yellow flames--
Call for service
Heater pilot flame
4. Turn the OVEN CONTROL knob to a setting above
200°F (93°C). The pilot flame will increase in size
and impinge on the temperature-response element.
The oven burner will light in 30-90 seconds.
The oven burner will operate until the set temperature
is reached. The oven burner will continue to cycle on
and off as necessary to maintain the oven at the tem-
perature indicated by the OVEN CONTROL knob.
Check _gnition of Surface Burners
Surface Burner _gnition
Operation of all cooktop and oven burners should be
checked after the pilots have been lighted (on some
models) and range and gas supply lines have been
carefully checked for leaks.
Standing Pi_ot Models
Select a top burner knob and simultaneously push in
and turn to HI position. The burner should light within
a few seconds. Try each burner in succession until all
burners have been checked.
Enectric ignition ModeRs
Select a top burner knob and simultaneously push in
and turn to LITE position. You will hear a snapping
sound indicating proper operation of the spark mod-
ule. Once the air has been purged from the supply
lines, burners should light within 4 seconds. After
burner lights, rotate knob out of the LITE position. Try
each burner in succession until all burners have been
checked.
(B) Yellow tips on
outer cones--
Normal for LP gas.
(C) Soft blue flames--
Normal for natural gas
if burner flames look like (A), call for service. Normal
burner flames should look like (B) or (C), depending
on the type of gas you use.
With LP gas, some yellow tipping on outer cones is
normal.
Check Bgnitionof Oven Burner
Your oven is designed to operate quietly and automatF
cally. To operate the oven, turn the OVEN CONTROL
knob to a setting above 200°F (93°C). After 30-90 sect
onds, the oven burner will ignite and burn until the Set
temperature is reached. The oven burner will continue
to cycle on and off as necessary to maintain the oven at
the temperature indicated by the OVEN CONTROL
knob.
Electric ignition models require electrical power to
operate. The oven cannot be lit during a power
outage. Gas will not flow unless the glow bar is hot;
If the oven is in use when a power outage occurs, the
oven burner will shut off and cannot be re-lit untit
power is restored.
34
Loading ...
Loading ...
Loading ...