Loading ...
Loading ...
Loading ...
USER MANUAL
PAGE 12
• Firstuse:After delivery, wait for eight hours
before connecting the appliance to your mains
supply. This will allow any refrigerant gases
that may have been disturbed during the
transportation process to settle.
• Firstcoolingdown: When you rst switch on
the Beverage Centre, the compressor will run
continuously until the Beverage Centre reaches
the set temperature. During this period of time, try
not to open the door frequently or place bottles
inside the appliance. After about 3–4 hours, you
can start loading the Beverage Centre.
• Odour:You may notice an odour when you rst
switch on the Beverage Centre. This is due to the
parts being new and is no cause for concern. The
odour will subside as the Beverage Centre starts
to cool.
IMPORTANT
• When you use the Beverage Centre for the rst
time or restart it after it has been turned o for a
long time, there could be a few degrees variance
between the temperature you select and the one
indicated on the LED display. This is normal and
it is due to the length of activation time. Once
the Beverage Centre has been running for a few
hours, everything will return back to normal.
• When loading several bottles or cans at once,
it will take longer for the appliance to cool the
individual bottles than when adding a bottle at
a time.
• If the unit is switched o or unplugged, you
must allow at least 5 minutes before restarting
the Beverage Centre or reconnecting it to your
mains supply.
TurningtheApplianceOnandO
• When the Beverage Centre is connected to the
power outlet it will turn on automatically.
NormalOperation
• During normal operation the controller display will
show the desired temperature that the Beverage
Centre is currently set to.
• The small indicator light on the left (under the
symbol) will illuminate to conrm the Beverage
Centre is in its normal cooling mode, and
compressor is running.
ToSettheDesiredTemperature
• Press the “SET” (
) button once. A ‘beep’ will
sound, and the display will start to ash.
• Use the “Up” or “Down” ( or ) buttons to set
to the desired temperature. Fig. 3
• Press “SET” again to complete the operation.
Alternatively, do not press anything for 5–10
seconds and the new desired temperature setting
will be saved.
AutomaticDefrost
Note: The Beverage Centre is built to automatically
defrost and prevent any ice forming on the
evaporator.
The ‘Defrost cycle will automatically run for 20
minutes once every 8 hours.
• When in a ‘Defrost’ cycle, the indicator light will
illuminate under the symbol.
ManualDefrost
• Press the ‘Defrost’ ( ) button and hold it
down—a ‘beep’ will sound as soon as it is
pressed.
• Hold button down for 6 seconds, until a second
‘beep’ can be heard.
• The indicator light will now illuminate under the
symbol and the Beverage Centre is now in
‘defrost’ cycle.
• ‘Defrost’ will run for 20 minutes, and then
automatically revert to normal operation.
Fig. 3
Pressed × 6
→
Instructions
Loading ...
Loading ...
Loading ...