Loading ...
Loading ...
Loading ...
USER MANUAL
PAGE 10
Built-InorFreestandingInstallation:Your
Beverage Centre can be used as a freestanding or
a built in unit. The clearances shown in the drawing
below (Fig. 1) should be followed for both types
of installation.
• In particular, the depth dimension must be
observed.
IMPORTANT: The vent at the base of the
appliance is for ventilation. Nothing should
be placed in front of this vent; otherwise your
Beverage Centre may not operate properly.
• A decorative plinth can be tted to the front
of the base vent as long as the cut out of
512mm wide × 40mm high is made in the plinth.
PositioningtheShelves
Position the shelf supports inside the racks on
the sides (as illustrated in Fig. 2) at your required
level. You can then place the shelves rmly on the
supports and begin to load your contents.
Note: The maximum load for a shelf is 40kg.
Fig. 1
Fig. 2
970
>900–905mm
590
Loading ...
Loading ...
Loading ...