Loading ...
Loading ...
Loading ...
DESCRIPTION
• This 9” band saw has welded steel frame and aluminum
table. It is designed to cut woods, plastics, and
nonferrous metals. The solid durable structure will
withstand continuous heavy-duty workloads for many
years to come.
• This band saw is equipped with miter gauge for various
precision operations.
• The versatile adjustable table can be easily tilted to any
angle between 0 and 45 degrees.
• Simple and quick saw blade tension adjustment.
• Convenient and comprehensive saw blade tracking
mechanism adjustment with view window for easy
operation.
• Dust collection port makes healthy working environment
possible.
• Powerful and durable Induction motor provides smooth
and quiet operation.
• This 9” saw blade features many versatile functions,
convenient operation, easy maintenance, durable
structure, and aesthetic design. It should provide
reliable service and please the professionals and
hobbyists alike.
For your own safety, read the entire operating manual and
safety instructions before using this tool.
SAFETY PRECAUTIONS
• Be aware of general power tool safety. Make sure all the
safety rules are understood.
• Disconnect the machine from power source whenever
adjusting or replacing any parts.
• Do not plug in unless switch is in “OFF” position.
• Keep hands away from all moving parts.
• Wear eye protection or face shield during operation.
• Make sure all mobile parts move freely and are free
from interference.
• Never turn the machine “ON” with the workpiece
contacting the blade.
• Do not force cut. Slowing or stalling will overheat motor.
• Blade guard and thrust bearings should be positioned
and adjusted correctly to prevent sideways and
rearward movement of the blade.
• Properly adjust the blade tension, tracking, blade
guides, and blade support bearings.
• Use proper saw blade according to type of workpiece.
• Allow the blade to reach full speed before cutting.
• Do not attempt to remove jammed objects from saw
blade until the switch is turned OFF and the blade has
completely stopped.
• Feed the workpiece through saw blade in a stable, slow,
an d constant manner.
• Hold the workpiece steadily on the table during
operation.
• Turn switch off and disconnect power whenever the
band saw is not in use.
• Keep band saw maintained following maintenance
instructions.
• Lower blade guide to adjust above the intended
workpiece before cutting.
• The saw blade must be properly tension and tracking
adjusted before use.
ON/OFF SWITCH
Refer to figure 6
The ON/OFF switch is located on front of band saw. To
turn the machine ON, pull the switch to the up position. To
turn the machine OFF, push the switch to the down
position.
NOTE: When the machine is not in use, the machine
should be locked in the “OFF” position to prevent
unauthorized use.
• To lock the machine, turn the switch to “OFF” position.
Pull the key out. The switch cannot be turned on without
the key.
• If the key is removed when the switch is at the “ON”
position, the switch can be turned off but cannot be
turned on again.
• To unlock, place the key into the slot on switch unit until
it snaps.
Figure 6
REPLACE BAND SAW BLADE
Refer to Figure 7 and 8
Turn the switch to the “OFF” position and disconnect the
machine from power source. Do wear leather gloves when
servicing band saw blade. Do not wear any gloves when
operating the band saw
• Turn blade tension knob counterclockwise to release
blade tension.
• Unlock door latches and open both the upper and lower
doors.
OPERATION
4
WARNING
WARNING
Loading ...
Loading ...
Loading ...