Troy-Bilt 52063 Troybilt high wheel trimmer

User Manual - Page 8

For 52063.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
STEP6: Connect and Charge
Battery
Wet conditionscan cause an electric
shock hazard during battery
recharging. Avoid wet conditions
when chargingbattery.
Rechargingthe battery with improper
equipment could cause a battery
explosion, Use only the battery
charger shipped with the unit. The
engine mustbe shut off and thespark
plug wire disconnected and moved
away from the sparkplug.
Failure to comply could result in per-
sonalinjuryor propertydamage.
Figure2-5: Lift and tilt debrisshield
forwardto accessbattery.
1. Lift and tilt debris shield (X, Figure2-
5) forward to view battery (P). Connect
the red wire (R, Figure2-6) to the posi-
tive (+) red-codedterminal on the bat-
tery. Then,connect the blackwire (S)to
the negative (-) black-codedterminalon
the battery. Closethe debris shield (X,
Figure2-5).
2. Connectthe small receptacle(U,
Figure2-7) on the battery rechargercord
to the wire harnessplug (V)located near
the keyswitch. Then,plug the charger
box (W) into a grounded, 120Vwall
outlet.
3. Chargethe batteryfor 24 hours.
After charging, first unplug the charger
box (W)from the wall outlet, then dis-
connect the recharging line plugs (U
and V).
Figure2_5
V U
Figure2-7
Loading ...
Loading ...
Loading ...