Loading ...
Loading ...
Loading ...
10
Handset Fig. 5.2
The handset displays the time, date and events. Programming
is via eight push buttons. The information is displayed via a
back-lit LCD screen.
Screens
The handset has 3 main screens.
1. The Information Home screen (main menu)
2. The Date/Time screen
3. The Events Programming screen
The display will revert to ‘sleep’ mode after approximately 3
minutes. Simply press the required button to open up any
screen.
Handset Advice
Operating Distance
The handset will only operate in the same room as the
cooker and up to a maximum distance of 13 feet (4 metres)
from the appliance. If out of recommended operating range,
the handset may show ‘Standby’. If this happens move the
handset back to within the recommended distance and it
should correct itself, see below.
Handset to AGA Total Control Signal Check
The
symbol is shown when in the following situations:-
1. In Standby mode
2. If communications fail
3. There is a power cut
4. If the handset is out of range of the AGA Total Control
cooker
When transferring information from or to the controller
always operate the handset in front of the cooker, this gives
the strongest signal.
If the handset shows
, when the cooker is on, press the
button rmly for 1 second, this will activate the
communication link between the cooker and handset.
Communication/Handshake
For details on initial Communication/Handshake, see page
11.
Preview Mode
If the handset is out of range of the cooker or if the appliance
is switched o, Preview only mode is available. Changes
cannot be made to the programmed events. The
symbol
is displayed in the screen and the message ‘Preview only’ is
displayed briey when the events program screen is rst
entered.
When in Preview Mode you can review the days by using the
and buttons. The and buttons become inactive
and you cannot make any changes.
USA
Model Number AGA TC3
FCC ID: A2M-AGA-TC3
FCC ID: A2M-AGA-TC3TEK
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CANADA
Model Number AGA TC3
IC: 10181A-AGATC3TEK
Model Number AE4M280526
IC: 10181A-AGATC3
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Communication or ‘Handshake’ button
Used initially to synchronise the handset to the AGA Total
Control. (On day of installation or in case of replacement
handset.)
Clock button
Opens and closes the date and time settings screen.
Left/Back button
Moves back and highlights the previous setting.
Plus button
Increases the highlighted setting.
Minus button
Decreases the highlighted setting.
Right/Forward button
Moves forward and highlights the next setting.
Copy button
Copies the time program from the current day to the
following day in the 7-day event calendar screen.
7-day event button
Opens and closes the 7-day event calendar screen.
Table 5.1 Button Operations
Loading ...
Loading ...
Loading ...