Loading ...
Loading ...
Loading ...
12
TruTouch Controls
An indicator light will be illuminated above most active features. Touch the icon
to activate the options below.
on off Press and hold for three seconds to turn off the cooling system to
clean the refrigerator. It also turns off the ice maker. The tempera-
ture displays will read OFF.
default settings Resets all refrigerator settings such as temp, temp display and
tones to their factory default settings.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired
setting. The temperature display will begin to blink with the rst
touch. The display will time out after 10 seconds and return to the
basic display.
energy saver Keep this switch set on energy saver (light on) for lowest energy
usage. If moisture appears on the cabinet between the doors,
pressing this button will turn the light off and enable an electric
heater used to reduce moisture on the cabinet between the doors.
temp mode Touch to toggle display from Fahrenheit to Celsius.
fast freeze Activates a faster rate for freezing food.
fast ice Increases the production of ice.
water lter Press and hold for three seconds to reset after lter change.
air lter Filter condition status is always displayed when door is open. Press
and hold for three seconds to reset after lter change.
mute sounds Tones emitted by each key press can be turned off based on user
preference. The sounds are muted when the red indicator is lit.
Warning signals will stay active.
IMPORTANT
Pressing the power on/off icon does not turn off power to your refrigerator.
You must unplug the power cord from the wall outlet.
Alarms
Door Ajar If the door has been left open for an extended period of time, an alarm
will sound and the door ajar indicator will display on the bottom display
of the control panel. The alarm is turned off by closing the door. The
mute sounds key will blink to prompt the reset of any active alarms.
Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the temperature display
will blink and display “HI”. After 20 minutes, the alarm will sound and the
high temp indicator will be red on the bottom of the control panel. The
mute sounds icon will illuminate until pressed, acknowledging the alarm,
at which time the highest temperature reached will be displayed and the
refrigerator will resume normal operation. In case the high temp alarm
is not acknowledged at the rst alarm sound time out, when the door is
rst opened, the alarm sound will be repeated.
Power Fail In the event of a power failure, the power fail alert will be displayed and
the temperature display will blink until the mute sounds icon is pressed,
acknowledging the alarm. Other modes may be turned off until the alarm
is acknowledged. The power fail alert is turned off and the refrigera-
tor will resume normal operation. The high temp alarm may also be
illuminated until a safe operating range temperature has been reached.
Loading ...
Loading ...
Loading ...