Loading ...
Loading ...
Loading ...
12
ASSEMBLY AND OPERATION
ATTACHING THE SCRAPER BEATER,
DOUGH HOOK OR WHISK
1. Ensure the mixer motor head is in the
raised open position. Align the groove
in the top of the scraper beater, dough
hook or whisk with the locking pin on
the spindle extending down from the
mixer motor head.
2. Press the scraper beater, dough hook or
whisk upwards and turn clockwise until
it locks securely onto the locking pin on
the spindle.
3. Lower the mixer motor head by
depressing the tilt back hinge button
and pushing the mixer motor head
down until it locks into the horizontal
(closed) position.
NOTE
When ingredients are in the mixing
bowl, the scraper beater may make a
slight noise as it scrapes the sides and
bottom of the bowl. This is normal and
should not cause concern.
Do not turn the mixer on with the
scraper beater in place if the mixing
bowl is empty. This will cause the
scraper beater to make a loud noise as
it scrapes the bowl.
OPERATING THE MIXER
Planetary Mixing Action
By replicating a similar mixing action used
by commercial mixers in bakeries and
patisseries, the Breville mixer head rotates
around the bowl whilst rotating the beater
in the opposite direction. This ensures
a superior and thorough mixing result
without the need for a rotating bowl.
1. Ensure the speed control dial is set to
the ‘0 – Stand By’ position, plug the cord
into a 230/240v power outlet and switch
the power ‘ON’ at the power outlet.
2. Add ingredients to the mixing bowl as
indicated in the recipe.
3. Always begin mixing by selecting a low
Loading ...
Loading ...
Loading ...