Loading ...
Loading ...
Loading ...
ELECTRONICOVENCONTROLS
Style 1 - Electronic Oven Controls (on some models)
A B C D E
/
H / J K L M
When power is first supplied to the appliance, "PF" or a flashing
time will appear on the display. Press CANCEL or OFF/CANCEL
to clear "PF" or flashing time from the display.
If "PF" or flashing time appears, a power failure has occurred.
Press CANCEL or OFF/CANCEL and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
When performing a timed cook function, the display will show
either hours and minutes, or minutes and seconds.
A. Display H. Warming drawer
B. Timer (on some models)
C. Clock I. Temperature
D. Auto clean J. Timed cooking
E. Oven light pad (on some models)
(on some models) K. Hour/minute
F. Sequence programming (on some models)
(on some models) L. Start/control lock
G. Oven settings M. Cancel
The START or START/ENTER pad begins any oven function. If not
pressed within 5 seconds after pressing a function pad, the
"START?" indicator light will flash as a reminder. On some
models, "START?" will appear on the display.
If not pressed within 5 minutes after pressing a function pad, the
oven display will return to the time of day mode and the
programmed function will be canceled.
Style 2 - Electronic Oven Controls (on some models)
A B CDE F
Delay Door Controls
Locked Locked
The CANCEL or OFF/CANCEL pad stops any function except the
Clock, Timer and Control Lock.
K J H
A. Oven display G. Temperature/time
B. Clock H. Cook time
C. Timer/cancel I. Start time
D. Start/enter (control lock) J. Custom broil
E, Auto clean K. Bake
F. Off/cancel
On some models, this is a 12-hour clock that shows a.m. and
p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Depending on your model, press the HR or MIN or TEMP/
TIME "up" or "down" arrow pads to set the time of day,
including a.m. or p.m,
3. Press CLOCK or START.
Tones are audible signals, indicating the following:
One tone
• Valid pad press
• Oven is preheated (long tone)
• Function has been entered
• Reminder, repeating each minute after the end-of-cycle tones
Three tones
• Invalid pad press
Four tones
• End of cycle
Reminder Tones: Reminder tones may be turned off. On some
models, press and hold STOP TIME for 5 seconds. "rEP OFF" or
"off" will appear in the display. Repeat to turn reminder tones
back on, and "rEP on" or "on" will appear in the display.
Loading ...
Loading ...
Loading ...