Loading ...
Loading ...
Loading ...
• Use Max Extract option.
Lo_t_J _ ""_c_,V'_i'__ _t_: ° Try using a high efficiency detergent to reduce sudsing.
E_ _of (t _: _, o Load is too smaHH.Very smaHHHoads (one or two items) may become unbaHanced and not spin
• Hake sure door is firmHy dosed.
• Hake sure hose connections are tight.
L_ <s%_/'_: • Hake sure end of drain hose is correctly inserted and secured to drain facility.
• Avoid overHoading.
° Use high efficiency detergent to prevent over:sudsing.
• Check fuse or reset circuit breaker.
• Straighten drain hoses. EHiminate kinked hoses. If there is a drain restrictiom caHHfor service.
'_/_._:,_t 5_,_ ° CHose the door and push the start/pause pad. For your safety_ washer wiHHnot tumbHe or
-,-. spin unHess the door is cHosed.
O_ _ _
• After pressing the start/pause pad, it wiHHtake 30 seconds before the cHothes washer begins
to spin.The door must Hock before spin can be achieved.
o See "Tub is CompHeteHy FuHHof Suds" bellow.
• PHug cord into HiveeHectricaH outHet.
• Check fuse or reset circuit breaH<er.
• CHose door and push the start/pause pad to start the cHothes washer. For your safety, wash:
er wiHHnot tumbHe or spin unHess door is cHosed.
• This may be a pause or soak period in the cycHe. VVait briefly and it may start.
• Check screens on inHet hoses at the faucets for obstructions. CHean screens periodically.
• Run the cHothes washer through another compHete cycHe using coHd water.
_:_j _.. ,,,.:_,_.;_°.. • Reduce detergent amount for that specific Hoad size, soiH HeveHand water hardness.
• Use high efficiency or How sudsing detergent speciaHHyformuHated for front Hoad washers.
o Turn both faucets on fuHHy.
• blake sure temperature seHection is correct.
• blake sure hoses are connected to correct faucets. Rush water Hines.
• Check the water heater. It shouHd be set to deHiver a minimum H20°F (49°C) hot water at the
tap. AHso check water heater capacity and recovery rate.
_: _ w;,_ _:_ ° Disconnect hoses and dean screens. Hose fiHter screens may be pHuy,ged.
o When warm rinse is seHected, onHy the finaH rinse wiHH be warm. The first two
rinses wiHHbe coHd.
"%_/';_:_' • As the washer is fiHHing,the water temperature may change as the automatic temperature
controH feature checks incoming water temperature. This is normaH.
o WhiHe the washer is fiHHing,you may notice just hot and/or just coHd water going through the
dispenser when coHd or warm wash temperatures are seHected. This is a normaH function of
the automatic temperature controH feature as the washer determines the temperature of the
water,
lO
Loading ...
Loading ...
Loading ...