Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
46
Preparing the worktop
Create the worktop cut-out as shown
in the hob and inset diagrams. Re-
member to maintain the minimum
safety distances (see “Installation –
Safety distances”).
Solid wood and tiled worktops:
Secure the wooden frame 2mm
below the top edge of the worktop.
Installing the hob
Feed the power cable for the hob
down through the worktop cut-out.
Centre the hob in the cut-out.
Connect the hob to the electricity
supply (see “Installation – Electrical
connection”).
Connect the hob to the gas supply
(see “Installation – Gas connection”).
Secure the hob (see “Installation –
Securing the hob”).
Check that the hob works (see “In-
stallation – Functional check”).
Seal the remaining gap with a silic-
one sealant that is heat-resistant to at
least 160°C.
Unsuitable sealant can damage nat-
ural stone.
For natural stone worktops and nat-
ural stone tiles, only use silicone
sealant that is specially formulated
for natural stone.
Follow the manufacturer’s instruc-
tions.
Loading ...
Loading ...
Loading ...