Loading ...
Loading ...
Loading ...
I
PILE HEIGHT SELECTION AND SETTING I
To select a pile height setting:
Make sure vacuum cleaner is OFF. Select
a pile height setting by tilting the vacuum
cleaner back until the front wheels are
lifted slightly off the floor.
Slide the adjustment lever to the correct
setting.
There are four (4) pile height settings on
the vacuum cleaner. Use the LOW setting
for most low-pile carpets and bare floor
cleaning. Use the HIGH setting for
high-pile carpets like shag carpet, scatter
rugs, etc. Use the other settings as
needed for carpet heights in between.
Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
* - Medium to deep pile.
* - Low to medium plle.
LO - Most carpets, bare floors, combined
with Carpet Bare floor Selector setting,
delicate carpets that require agitator to
be turned off.
A CAUTION
Do not allow vacuum €leaner to remain in
one spot For any length of time when the
agitator is turning. Damage to carpet may
occur.
Loading ...
Loading ...
Loading ...