Loading ...
Loading ...
Loading ...
8
Finial
Threaded
Rod
Finial Cap
9-pin Connector
Bulb
Light Pan Screw
Light Pan
Light Cage
Light Kit
Light Kit
Finial Cap
Finial
Light Kit
Grommet
ASSEMBLY INSTRUCTIONS
14
13. Remove one and loosen the other two light pan
screws from the light pan. Connect the 9-pin connector
from the motor assembly to the 9-pin connector from the
light kit. Then, raise the light kit. Align the keyholes with
the remaining two light pan screws. Lift and rotate the
light kit clockwise and re-install the previously removed
light pan screw. Tighten all three light pan screws.
14. Install the E26-base LED bulbs into the sockets of the
light kit. Remove the preassembled nial and nial cap
from the threaded rod at the bottom of the light kit.
13
15
15. Feed the o-center pull chain from the light kit
through the grommet. Then lift the light cage into the
light pan and turn in a clockwise direction until the light
cage is secure.
Note: The o-center pull chain and threaded rod should
be visible through hole in light cage.
16
16. Feed the pull chain coming from the threaded rod
through the center hole in the nial cap and the o-center
pull chain through the o-center hole in the nial cap.
Secure using the nial.
Threaded
Rod
Loading ...
Loading ...
Loading ...