Loading ...
Loading ...
Loading ...
7
Adapter Plate Screw
Adapter
Plate
Canopy
J-shaped Slot
Round Hole
Blade
Arm
Blade Screw
Blade Washer
Blade
Mounting
Bracket Screw
Blade Arm
Motor Screw
Motor Assembly
ASSEMBLY INSTRUCTIONS
11
10
10. Partially insert three blade screws, along with their
washers, through the blade and into the blade arm.
Tighten each blade screw with a Phillips screwdriver (not
included), starting with the one in the middle. Repeat this
step for the remaining blades and blade arms.
11. Secure the blade arm to the underneath side of the
motor assembly using motor screws removed in Step 3.
Completely secure each blade arm to motor assembly
before moving to the next.
9. Raise the canopy, ensuring the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy clockwise until the mounting
bracket screws are completely engaged in the J-shaped
slots. Install the two previously removed mounting
bracket screws in the round holes. Securely tighten all four
mounting bracket screws.
9
12
12. Remove one of the three adapter plate screws
installed in the adapter plate. Then, loosen but do not
remove the other two adapter plate screws. Align the
keyholes of the light pan with the remaining two adapter
plate screws. Feed the 9-pin connector through the center
of the light pan. Lift and rotate the light pan clockwise
and re-install the previously removed adapter plate screw.
Tighten all three adapter plate screws.
Light Pan
9-pin
Connector
Loading ...
Loading ...
Loading ...