Loading ...
Loading ...
Loading ...
===IHI=Ill
ASSEM LY
== H =,=l =H
INSTALL BATTERY (See Figs. 4 & 5) TERMINALGUARD
CAUTION: Do not short battery termi-
nals. Before Installing battery, remove
metal bracelets, wristwatch bands,
rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
• Lift seat to raised position.
• Lower battery into fender well with battery terminals
toward front of unit. Make sure battery rests in battery
tray
, Be sure battery drain tube has not come loose and is
securely attached to drain in battery tray.
• First connect RED battery cable to positive (+) battery
terminal with hex bolt, flat washer, lockwasher and hex
nut as shown. Tighten securely.
• Connect BLACK grounding cable to negative (-) bat-
tery terminal with remaining hex bolt, flat washer,
tockwasher and hex nut_ Tighten securely.
• Slide the two battery bolts through the terminal guard
and start the wing nuts onto the threads
• Position terminal guard over the battery as shown,
lower bolts into key holes and slide square shafts of
bolts into slots of key holes,
• Tighten wing nuts by hand making sure battery bolts
remain in slots of the key holes in the battery support.
• Be sure terminal access doors are closed.
Use terminal access doors for:
• Inspection for secure connections (to tighten hard-
ware).
° Inspection for corrosion.
• Testing battery,
• Jumping (if required).
• Periodic charging.
POSITIVE (+) NEGATIVE ( - )
TERMINAL TERMINAL
NEGATIVE
POSITIVE (RED) (BLACK)
CABLE
FLATWASHERS CABLE
HEX NUT LOCKWASHERS HEX NUT
FIG_ 4
WING ACCESS
NUT DOOR
BATTERY
BOLT
KEY BATTERY BATTERY
HOLE DRAIN TUBE TRAY
FIG, 5
,[CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TOASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SA TISFAC TION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
¢" Atl assembly instructions have been completed.
¢" No remaining loose parts in carton.
v' Batteryis properly prepared and charged. (Minimum
1 hour at 6 amps).
v" Seat is adjusted comfortably and tightened securely,
,/ All tires are properly inflated, (For shipping purposes,
the tires were over-inflated at the factory)
,/ Be sure mower deck is properly leveted side.to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling)_
€" Check mower and drive belts, Be sure they are routed
properly around pulleys and inside all belt keepers
¢" Check wiring, See that all connections are still secure
and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
,," Engine oil is at proper level,
€" Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
¢" Become familiar with all controls - their location and
function, Operate them before you start the engine.
,/ Be sure brake system is in safe operating condition.
Loading ...
Loading ...
Loading ...