Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
u ,,11,n
TO REPLACE FUSE (See Fig. 29)
Replace with 30 amp automotive4ype plug-in fuse, The
fuse holder is located in the engine compartment, directly
in front of the dash,
FUSE
HOLDER
HOOD
HINGE BRACKET
FIG_ 30
LIGHT
CONNECTOR
HOOD SPRING
FIG. 29
TO REPLACE HEADLIGHT BULB
• Raise hood.
• Pull bulb holder out of the hole in the backside of the
grill
• Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the gal!!,
• Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running or prevent itfrom starting
• Check wiring. See electrical wiring diagram in Repair
Parts section of this manual.
TO REMOVE HOOD, GRILL AND SIDE PAN-
ELS (See Fig's, 30 and 31)
• Raise hOOdr
• Unsnap headlight wire connector.
, Stand at side of tractor. Grasp hood and tilt forward
and lift off hinge brackets.
• To reinstall,slide hood pivot rod into slot in hinge
brackets, and carefully reinstall hood springs.
HOOD PIVOT ROD
HINGE BRACKET
SLOT
FIG. 31
23
Loading ...
Loading ...
Loading ...