Loading ...
Loading ...
Loading ...
English
8
Proper Hand Position (Fig. I)
WARNING: To reduce the risk of serious personal
injury, ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
suddenreaction.
Proper hand position requires the left hand on the front
handle
11
, with the right hand on the rear handle
10
.
• Guard Against Kickback which can result in severe
injury or death. See general Power Tool safety
Warnings Causes and Operator Prevention
of Kickback and Kickback safety Features ,
to avoid the risk ofkickback.
• Do not overreach. Do not cut above chest height.
Make sure your footing is firm. Keep feet apart.
Divide your weight evenly on bothfeet.
• Use a firm grip with your left hand on the front
handle
11
and your right hand on the rear
handle
10
so that your body is to the left of the
guidebar.
• Do not hold chain saw by front hand guard
3
.
Keep elbow of left arm locked so that left arm is
straight to withstand akickback.
WARNING: Never use a cross-handed grip (left
hand on the rear handle and right hand on the
fronthandle).
WARNING: Never allow any part of your body to
be in line with the guide bar
4
when operating the
chainsaw.
• Never operate while in a tree, in any awkward
position or on a ladder or other unstable surface.
You may lose control of saw causing severeinjury.
• Keep the chain saw running at full speed the entire
time you arecutting.
• Allow the saw chain to cut for you. Exert only light
pressure. Do not put pressure on chain saw at end
ofcut.
ON/OFF Switch (Fig.J)
Always be sure of your footing and grip the chain saw firmly
with both hands with the thumb and fingers encircling
bothhandles.
To turn the tool ON, depress the lock off button
2
and
squeeze the trigger switch
1
as shown in Fig. J. Once the
tool is running you can release the lock offbutton.
To turn the unit off, release thetrigger.
Fig.I
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
Operating the Chain Saw (Fig.A)
WARNING: Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious personalinjury.
Transporting Chain Saw (Fig.A,H)
• Always turn unit off and disconnect it from power
source and cover the guide bar
4
with the guide bar
scabbard
9
when transporting thesaw.
Fig.H
9
4
11
10
Fig.J
12
Loading ...
Loading ...
Loading ...