Loading ...
Loading ...
Loading ...
Getting Started
6
1. Please check carton box and inter contents for any type of damage. All damages caused in
shipment or transit MUST be reported to the manufacturer immediately.
2. Please reference the below list to ensure no parts or accessories are missing.
(Please refer the alphabetical letter below to its visual description on page 7, ensuring all items
are included.)
A. 10L Outdoor Portable Gas Tankless Water Heater
B. ON/OFF switch shower head with
C. CSA Certified gas regulator with 5 feet hose
D. Gas Compression Fitting *fixed to gas inlet fitting already
3. For Standard Garden Hose Use, please refer to page 8 "How To Use Garden Hose Adapters"
section.
4. Install gas supply line and regulator to the portable tankless water heater with included wrench
set. DO NOT OVER TIGHTEN. OVER TIGHTING MAY CRACK THE GAS REGULATOR CAUSING A
GAS LEAK! Check for any gas smell before ignition! Make sure it is tightened all the way on.
5. Attach shower hose to the fitting marked ‘Water Outlet.’ Do not over tighten.
6. Install 2 size D cell batteries in the compartment on the bottom left of the heater. Check that
batteries are facing the correct direction.
7. Use the top tab on the portable tankless water heater to suspend from a mounted screw
capable of holding 30 pounds. Place at a comfortable height without putting stress on the gas
hose.
8. Attach gas regulator with hose to the LP cylinder. Use hand pressure only on the plastic
connector.
LEAVE GAS CYLINDER VALVE IN THE “OFF” POSITION.
WARNING!
THE 10L POETABLE TANKLESS WATER HEATERS HAVE 5/8″-18UNF ADAPTER
ALREADY ATTACHED TO THE GAS INLET ON THE WATER HEATER.
ALWAYS CHECK FOR GAS LEAKS BEFORE USING HEATER.
GAS HOSE ADAPTER
E. 1/2” BSP female X 1-1/16"-12UN male, 1/2” BSP female X 1-1/16"-12UN female to
garden hose adapter
F. Hardware Pack
G. Wrench Set
Loading ...
Loading ...
Loading ...