Loading ...
Loading ...
Loading ...
www.usaprocom.com
21200159-01B
INSPECTING BURNERS
Approx. 3"-6" Above Top of Logs
More Than 8" Above Top of Logs
Approx. 3"-6" Above Top of Logs
More Than 8" Above Top of Logs
Figure 24 - Correct Pilot Flame Pattern
(Natural Gas shown)
Figure 25 - Incorrect Pilot Flame Pattern
(Natural Gas shown)
Figure 26 - Correct Burner Flame Pattern
with Control Knob Set to HI (5)
Figure 27 - Incorrect Burner Flame
Pattern with Control Knob Set to HI (5)
BURNER FLAME PATTERN
Figure 26 shows a correct burner ame pattern. Figure 27 shows an incorrect burner ame
pattern. If burner ame pattern is incorrect then:
turn heater o󰀨 (see To Turn O Gas to Appliance, page 19).
see Troubleshooting pages 23 through 26.
BURNER PRIMARY AIR HOLES
Air is drawn into the burner through the holes in the tting at the entrance to the burner. These
holes may become blocked with dust or lint. Periodically inspect these holes for any blockage
and clean as necessary. Blocked air holes will create soot.
NG
3-3.5" WC
Natural Gas
Shown
LP
8-11" WC
NG
3-3.5" WC
Natural Gas
Shown
LP
8-11" WC
CARE AND MAINTENANCE
WARNING: Turn o󰀨 heater and let cool before servicing.
CAUTION: You must keep control areas, burner, and circulating
air passageways of heater clean. Inspect these areas of heater
before each use. Have heater inspected yearly by a qualied service
technician. Heater may need more frequent cleaning due to excessive
lint from carpeting, bedding material, pet hair, etc.
WARNING: Failure to keep the primary air opening(s) of the
burner(s) clean may result in sooting and property damage.
MAIN BURNER
Periodically inspect all burner ame holes with
the heater running. All slotted burner ame
holes should be open with yellow ame pres-
ent. All round burner ame holes should be
open with a small blue ame present. Some
burner ame holes may become blocked by
debris or rust, with no ame present. If so,
turn o󰀨 the heater and let it cool, and remove
blockage or replace burner. Blocked burner
ame holes will create soot.
Loading ...
Loading ...
Loading ...