MAP14S1TBL User Manual

Loading ...

User Manual Page 17

Foam seal C

(Non-adhesive type)

Security Bracket

2 Screws

Foam seal B

(Adhesive

type-shorter)

Foam seal A

(Adhesive

type)

Window slider A

Window slider B

(if required)

Window

Kit Brace

Type 2: Sliding window Installation (Optional)

1. Cut the adhesive foam seal A and B strips to the proper

lengths, and attach them to the window sash and frame

as shown.

2. Insert the window slider assembly into the window opening.

Insert the slider assembly into the window opening. If the

hose opening is covered by the window frame, rotate the

panel so the thicker side faces the window frame.

Attach the Window Kit Brace to the back of the hose panel –

trim the brace if necessary.

3. Cut the non-adhesive foam seal C strip to match the width

of the window. Insert the seal between the glass and the

window frame to prevent air and insects from getting into

the room.

4. If desired, install the security bracket with 2 screws as

shown.

5. Attach the Hung Window Adapter to the hose by lining up

the circles on the adapter the hose. Insert the window slider

adapter into the hole of the window slider.

Loading ...

User Manual - Page 17