Loading ...
Loading ...
Loading ...
Page 16 User Manual
Type 1: Hung window installation
1. Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
2. Insert the window slider assembly into the window opening.
If the hose opening is covered by the window frame, rotate the
panel so the thicker side faces the window frame.
Attach the Window Kit Brace to the back of the hose panel –
trim the brace if necessary.
Foam seal B
(Adhesive type-shorter)
Foam
seal A
(Adhesive
type)
Window
slider A
Window
slider B
(if required)
Window
Kit Brace
Sliding
Window
Adapter
(Front + Rear)
Air
Divider
3: Assembling the Sliding Window Adapter (Only needed
for Sliding Window applications).
Align both halves of the sliding window adapter and connect
them. Then, attach the air divider to the newly formed window
adapter on the outdoor side. The fully assembled adapter
should look like the image at the left.
Loading ...
Loading ...
Loading ...