Masterforce EP142 7" Wool Buffing Bonnet with Pad

OPERATOR’S MANUAL - Page 9

For EP142.

PDF File Manual, 14 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
page 9
APPLICATION
These instructions and suggestions are intended to familiarize new operators in overall general
operation of power polishing. You will develop your own techniques which will make the job easier
and faster as you learn power polishing.FIG.4
FIG. 4
• You should use utmost care when power
polishing around or over sharp objects and
contours of the car body. It is very important
to use the correct pressure while polishing
various sections of an automobile body. For
example, light pressure should be applied
when polishing over sharp edges of body
panels, or over edges of the rain gutter along
the top.
• Since everyone does not use the same type
of power polish, we recommend you clean
and polish a test section on a at area of the
car rst. From this test section, you can judge
the strength or cleaning action of your power
polish.
• Remember, all power polish is not the same. Different brands will react differently on various painted
surfaces. Also, you are now using a power polisher with power polish. This is entirely different from
any hand application which you may have done before. Wash the car before power polishing it.
Washing will remove loose dirt, scum, road salt, etc. which could act as an abrasive and damage
paint. Loose dirt, etc. will also clog the polishing pad and you will have to clean it more often.
• Without turning the tool on, grasp the handles of the tool and pick it up (Fig. 4). Keep the tool away
from your body and depress the trigger switch. Make sure you have a rm grip on the handles and
operate the tool freely without forced effort or unnecessary pressure. The side handle can be easily
changed to either side of the tool for left-handed or right-handed operation.
NOTE: The high speed rubbing action of the polishing bonnet upon the surface of an automobile
can build a static charge on the metal portions of this tool. This can result in a sensation of a very
short mild electric shock when the metal area of the tool is touched, and will be more noticeable
on days when the humidity is low. This is a harmless phenomenon but if you need assistance you
can contact our customer service center at:1-866-915-8626.
Loading ...
Loading ...
Loading ...