Loading ...
Loading ...
Loading ...
10
USING YOUR AIR FRYER
1. Plug in. Press to turn on the air fryer
display.
2. Press PREHEAT. The display will show
“400°F” and “4 MIN”.
3. Optionally, press the + or – buttons to
change the temperature. The time will
adjust automatically.
4. Press to begin preheating.
5. When preheating is done, the air fryer
will beep 3 times. The display will show
the set preheat temperature. [
Figure 2.1
]
Preheating
Figure 1.2
Figure 2.1
• The crisper plate contains 4 rubber
stoppers made of safe, FDA-approved
material. These stoppers keep the crisper
plate fitted to the bottom of the basket,
prevent the crisper plate from directly
touching the basket, and in rare cases,
damaging the nonstick coating on the
basket.
• Only remove the rubber stoppers for
cleaning purposes. For easy removal, start
from the bottom of the crisper plate and
pull out one side of the stopper at a time.
[
Figure 1.2
]
• To place the rubber stoppers back onto
the crisper plate, first soak them in water.
Then, push each stopper back in through
the bottom of the crisper plate. Push in
one side of the stopper at a time.
Rubber Stoppers
We recommend preheating before placing
food inside the air fryer, unless your air fryer
is already hot. Food will not cook thoroughly
without preheating.
Temperature Time
400°–450°F / 205°-230°C 4 minutes
290°–390°F / 143°-199°C 3 minutes
170°–280°F / 77°–140°C 2 minutes
Note: If no buttons are pressed for 3 minutes, the
air fryer will clear all settings and go into standby.
Loading ...
Loading ...
Loading ...