Loading ...
Loading ...
Loading ...
EN
FAQ
147
Viewfinder is out of focus Check the diopter setting and adjust as needed
AF metering field is framed in red with activated
AF; images out of focus
Focusing was unsuccessful Try to focus again
No AF metering field selectable Focus ring not in AF position Turn the focus ring to the AF position
Automatic Metering Field Control, Portrait Mode in the
Scene Modes menu or Face Detection in AF mode is
selected
Select other control mode
Image Review is activated Deactivate Image Review
Camera is in Standby mode Press the shutter button to the first pressure point
AF assist light does not light up The AF mode “AFc” is selected or “Continuous AF” is
activated in AFs mode
Change the mode
Camera is recording a video or is in Live View mode Change the mode
Function is deactivated Activate AF
Video recording
No video is recorded The camera is overheated and the function was
temporarily disabled to protect the camera
Allow camera to cool down
Video recording stops Maximum length of individual video sequence was
reached
The memory card's write speed is too low for the
selected video resolution/compression
Insert another memory card or change the storage
method
Review/playback and video/image management
Selected images cannot be deleted Some of the selected images are write protected Remove write protection (using the device with which
the file was originally set to write protected)
File numbering does not start at 1 The memory card contains previously stored images See section “Data Management”
The time and date settings are incorrect or are not
displayed
The camera has not been in use for an extended period
of time (the battery was removed)
Insert a charged battery and configure the correct
settings
The time and date stamp on images are incorrect Time settings are incorrect Set the time correctly
Caution: Time settings will be lost if the camera is not
used/remains in storage with a depleted battery over
an extended period of time
The time and date stamp on images are unwanted Setting was ignored Cannot be removed in retrospect
Deactivate the function as needed
Pictures/recordings are damaged or missing The memory card was removed while the readiness
indicator was flashing
Never remove the memory card while the readiness
indicator is flashing. Charge the battery.
The memory card formatting is faulty or the card is
damaged
Reformat the memory card
(Caution: Loss of data!)
Loading ...
Loading ...
Loading ...