Loading ...
Loading ...
Loading ...
EN
Picture Mode
103
Notes
• The following applies for set compensation values, no matter
how they were initially set: They remain effective until they are
manually reset to 00, i.e. even if the camera is switched off and
on again in the meantime.
• A compensation value configured on the camera will be
overruled when a relevantly equipped flash unit is attached, e.g.
a Leica SF60 and a compensation value is entered on that flash
unit.
• The menu item Flash Exp. CompensationFlash Exp. Compensation can only be used in
conjunction with flash units on which the compensation value
cannot be set manually (e.g. Leica SF26).
• A brighter flash illumination with Plus compensation will require
a greater flash intensity. Flash exposure compensation will
therefore impact on the flash range: A Plus correction will
decrease it, a Minus correction will increase it.
• An exposure compensation set on the camera will only affect
the measurement of ambient light. If a simultaneous TTL flash
exposure metering compensation is desired in flash mode, then
it must be additionally set on the flash unit. (Exception: On the
Leica SF26, the compensation value must be set on the camera
via menu control.)
FLASH PHOTOGRAPHY
▸ Switch on the flash unit
▸ Set the desired guide number control mode (e.g. TTL or GNC =
Guide Number Control) on the flash unit
▸ Switching the camera on
▸ Set the desired exposure mode, shutter speed and/or aperture
setting
• It is imperative to take note of the shortest flash sync speed, as
it determines whether a “normal” flash or an HSS flash is fired.
▸ Tap the shutter button before each flash exposure to activate
exposure metering
• The flash unit may not fire if this step is missed by pressing the
shutter button down completely and skipping these settings.
Loading ...
Loading ...
Loading ...