Loading ...
Loading ...
Loading ...
21
Header Wall
Header Bracket
Metal Door
Door
Bracket
2x4 Support
(Finished Ceiling)
Door Bracket
Vertical
Centerline
of Garage
Door
Optional
Placement
of Door
Bracket
Self-Threading Screw
Top of Door
(Inside Garage)
Top of Door
(Inside Garage)
Top Edge of
Door
Top Edge of
Door
Optional
Placement
Optional
Placement
For a door with no exposed
framing, or for the optional
installation, use lag screws
5/16”x1-1/2” (not provided)
to fasten the door bracket.
Wood Door
Door
Bracket
Hardware (not
provided)
Hardware (not
provided)
STEP 8 Install the Door Bracket (continued)
OPTION B - ONE-PIECE DOORS
1. Center the door bracket on the top of the door, in line with the header bracket as shown.
2. Mark either the left and right, or the top and bottom holes.
Metal Doors:
Drill 3/16” pilot holes and fasten the bracket with the self-threading screws provided.
Wood Doors:
Drill 5/16” holes and use 5/16”-18x2” carriage bolts, lock washers and nuts (not provided)
or 5/16”x1-1/2” lag screws (not provided) depending on your installation needs.
NOTE:
The door bracket may be installed on the top edge of the door if required for your installation.
(Refer to the dotted line optional placement drawing.)
Installation
Loading ...
Loading ...
Loading ...