Loading ...
Loading ...
Loading ...
9
SPECIFICATIONS
GLASS SPECIFICATIONS
This stove is equipped with 3 panes ofceramic glass.
Replace glass only with Qualified ceramic glass.
Model Number
BTU/Hour Output (1)
Heating Capacity (2)
Particulate Emissions
Efficiency
Power Consumption
Power Consumption
Fuel Storage Capacity
Exhaust Size
*Width
*Height
*Depth
Weight
Shroud Width
Shroud Hight
Room Blower CFM
HP22i
20,000-50,000
Up to 2,800 sq. ft.
1.511 g/hr
73.2%
520 Watts ignition
150 Watts operation
55 lbs
3" Standard
19"
24.5"
12"
231 lbs.
43"
32"
142 CFM
WARNING
If you see black smoke at the end of the
exhaust/chimney, these are not normal
emissions.
Check for clinkers or blockages in the burn
pot.
Check for leakages around the stove, such as
glass door or ash pan.
Check for potential blockages in the exhaust
channels.
Check that the exhaust voltages are correctly
set.
1.
2.
3.
4.
WARNING
(1) Heat output will vary depending on the
brand, type and quality of fuel, and the moisture
content.
Consult your dealer for best results.
(2) Based on post 1982 home construction,
requiring 35 BTU/Hr. per Sq. Ft.
Emissions will vary, depending on the feed
level, burning time, and fuel. Consult your
dealer for best results.
Measurements above are of the insertable
fire box.
UNPACKING
Your stove will come fully assembled.
Remove all packing material and tape from the
inside of the firebox.
Remove any tape on the outside of the glass.
Open hopper, and remove all packing material and
power cord.
Note: Make sure the hopper is free of all forign matter
before filling with fuel. Forign material will cause auger
jams and will void stove warranty.
This stove has a manufacturer set minimum low
burn rate that must not be altered. It is against
federal regulations to alter this setting or otherwise
operate this stove in a manner inconsistent with
the operating instructions within this manual. If the
unit is modified, it will no longer be compliant with
the EPA regulations.
Loading ...
Loading ...
Loading ...