Loading ...
Loading ...
Loading ...
Page 32
Installation and Operation Manual - Wood Stove
ENGLISH
7.2 Gasket
The glass gasket is flat, adhesive-backed, woven fibreglass. The gasket must be centred on the
edge of the glass.
1. Follow the steps of the previous section to remove the
glass.
2. Remove the old gasket and clean the glass thoroughly.
3. Peel back a section of the paper covering the adhesive
and place the gasket on a table with the adhesive side
up.
4. Stick the end of the gasket to the middle of one edge,
then press the edge of the glass down onto the gasket,
taking care that it is perfectly centred on the gasket.
5. Peel off more of the backing and rotate the glass. The
gasket must not be stretched during installation.
6. Cut the gasket to the required length.
7. Pinch the gasket onto the glass in a U shape, all around
the glass.
7.3 Door
In order for the stove to burn at its best
efficiency, the door must provide a perfect
seal with the firebox. The tightness of the
door seal can be verified by closing and
latching the door on a strip of paper. The
test must be performed all around the door.
If the paper slips out easily anywhere, either
adjust the door or replace the gasket.
Loading ...
Loading ...
Loading ...