Loading ...
Loading ...
Loading ...
Reminder: There are 3 indicators at the left side of control panel, when the heater has its initial use,
heater function is set at the low level. This model has thermostat function, when the environment
temperature reaches the desired temperature, the heater will shut down automatically.
There are eight (8) buttons on the remote control and four (4) corresponding buttons on the control
panel of the electric fireplace insert.
1. [ON/OFF (or )] turns the electric fireplace insert either on or off. When the heater is off, press
this button once to turn the heater on, press it again to turn the heater off.
2. [FLAME (or )] controls the color and brightness of flame and log, there are 6 shifts that can
be selected. When heater is turned on the first time, flame and log is at their brightest level. Press
the button each time, the flame color can be adjusted. Long press the button for 3 seconds, the
corresponding digital display will blink, then press the button, the brightness of flame and log will
cycle through the brightest level to weakest level.
3. [HEAT (or )] controls the heating element. Press once, the heater is at the low level; press
again, the heater is at the high level; then press the third time, the heater stops and heating
element is turned off. Long press the button for 3 seconds, temperature can be adjusted, follow
the “TEMPERATURE SETTING AND OPERATION” below to operate the fieplace.
07
ON/OFFHeat
+
_
Flame
Timer
Heat OFF Downlight
Figure 11
Remote Control
Figure 10
00
Control Panel
ON/OFFTimerFlameHeat
ReceiverDigital display
Working indicator
Low heat level indicator
High heat level indicator
CONTROL PANEL & REMOTE CONTROL FUNCTION
Loading ...
Loading ...
Loading ...