Loading ...
Loading ...
IMPORTANT SAFETY INFORMATION!
25. To avoid damage when transporting or storing this electric fireplace insert, always keep both the
insert and its power cord in a dry place and free from excessive vibration.
26. Use this electric fireplace insert ONLY as described in this Operating Manual. Using this device
in a manner other than recommended by the manufacturer may cause fire, electric shock, injury
to persons, and/or damage to property.
27. To reduce the risk of fire, do not store or use gasoline or other flammable vapors and liquids in
this vicinity of the heater.
28. To disconnect heater, turn controls to off, and turn off power to heater circuit main disconnect
panel.
29. To prevent a possible fire, do not block air intakes or exhaust in any manner.
30. Warn that the heater must be properly installed before it is used.
31. If the product is not used for a long period of time, please unplug the power cord from wall outlet
to assure safety.
32. NEVER plug this heater into an outlet that is old, cracked, or has any loose wires or
connections. Plugging this heater into a faulty outlet could result in electric arcing within the
outlet that could cause the outlet to overheat or catch fire.
33. ALWAYS check your heater cord and plug connections with each use.
i) MAKE SURE the plug fits tight in the outlet. Faulty wall outlet connections or loose plugs can
cause the outlet to overheat.
ii) Heaters draw more current than small appliances. Overheating may occur even if it has not
occurred with the use of other appliances.
iii) During use check frequently to see if the plug outlet or faceplate is HOT!
iv) If the outlet or faceplate is HOT, discontinue use immediately and have a qualified electrician
inspect and/or replace the faulty outlets.
34. Grounding Instructions:
This fireplace is for use on 120V outlets. The cord has a three-prong plug (see Figure 1). If a
three-slot grounded receptacle is not available, the adapter should be used. The adapter should
be properly grounded to outlet box.
NOTE: Adapter NOT INCLUDED.
03
Grounding pin
Adapter
Metal Grounding Screw
Figure 1
PRODUCT SPECIFICATION
Voltage 120V AC, 60Hz
11.67 AMPS
1400 Watts
AMPS
Maximum Watts
Loading ...
Loading ...
Loading ...