Loading ...
Loading ...
Loading ...
111
5
Safety
"ISOFIX" mountings
The seats, shown below, are fitted with ISOFIX
compliant mountings:
The mountings comprise three rings for each
seat:
ISOFIX child seats are fitted with two latches
which are secured on the two rings A.
Some seats also have an upper strap which is
attached to ring B.
To secure the child seat to the TOP TETHER:
F remove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed),
F pass the strap of the child seat behind
the seat backrest, centring it between the
apertures for the head restraint rods,
F secure the upper strap hook to ring B,
F tighten the upper strap.
When fitting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before fitting the seat, first move the
centre rear seat belt towards the middle
of the vehicle, so as to avoid the seat
interfering with the operation of the seat
belt.
- two rings A, located between the vehicle
seat backrest and cushion, indicated by
a marking,
Front seat
Rear seats
- one ring B, located behind the seat and
indicated by a marking, referred to as the
TOP TETHER for fixing the upper strap.
This system prevents the child seat from tipping
forward in the event of a front impact.
This ISOFIX mounting system ensures fast,
reliable and safe fitting of the child seat in your
vehicle.
Loading ...
Loading ...
Loading ...