Loading ...
Loading ...
Loading ...
9
Dual-Zone Wine and Beverage Cooler
www.insigniaproducts.com
Setting up your wine and beverage cooler
Before using your cooler
• Remove the exterior and interior packing.
• Let the cooler stand upright for approximately six hours before
connecting it to power. This reduces the possibility of a malfunction in
the cooling system from improper handling during transportation.
• Clean the exterior surface of your cooler with a soft, dry cloth and
clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• This cooler is designed to be built-in or free standing.
• Place your cooler on a floor, countertop, or cabinet that is strong
enough to support the cooler when it is fully loaded.
• Locate the cooler away from direct sunlight and sources of heat (stove,
heater, radiator, and so on). Direct sunlight may affect the acrylic
coating and heat sources may increase electrical consumption.
• Ambient temperature below 68° F (20° C) or above 90° F (32° C) will
hinder the performance of this cooler. This cooler is not designed for
use in a garage or any other outside installation.
• Avoid locating the cooler in moist areas.
• This appliance is intended for household use only. It is not designed
for outside installation, including anywhere that is not temperature
controlled (garages, porches, vehicles, etc.). This unit is not designed
to be installed in an RV or used with an inverter.
• Do not stack beverage coolers.
CAUTION: This appliance is heavy. We suggest that two people be used when
setting up or moving your cooler.
Loading ...
Loading ...
Loading ...