Loading ...
Loading ...
Loading ...
14
www.insigniaproducts.com
Connecting to power
Plug the appliance into a dedicated, properly installed grounded wall
outlet. This appliance should be operated on a separate electrical circuit
from other appliances. Any questions concerning power and/or
grounding should be directed toward a certified electrician or an
authorized service center.
Plug in and run your cooler for three to four hours before making any
temperature adjustments and before adding wine. This allows your cooler
to reach a stable temperature.
Do not use an extension cord with this cooler. If the power cord is too
short, have a qualified electrician install an outlet near the cooler. Use of
an extension cord can negatively affect the cooler’s performance.
Using your wine and beverage cooler
Turning on your cooler
Press the button to turn your cooler on. The display screen and indicators
blink for three seconds and an audible beep will be heard, then the
compressor starts working.
You can manually set your unit to “Standby” mode by pressing and holding
the button for approximately three seconds, provided that no other
setting is in effect (the display is not blinking). Repeating this action restarts
the unit.
Setting the temperature
Under normal conditions, the display always shows the set temperature.
When adjusting the temperature, the display blinks to indicate that the
temperature is being adjusted.
The default temperature setting is 54° F (12° C), and the default temperature
scale is ° F.
When the or buttons are pressed, the temperature increases or
decreases in increments of one degree.
CAUTION: This unit is not designed to be installed in an RV or used with an
inverter.
Notes:
Check your local power source. This cooler requires a 110 V-120 V, 60 Hz
power supply.
Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric shock
hazard from this cooler.
Loading ...
Loading ...
Loading ...