Loading ...
Loading ...
Loading ...
22
www.insigniaproducts.com
Troubleshooting
Error codes
If the “HI”, “LO”, or “CL” error codes appear on the display for more than five
minutes, a power reset may rectify the issue (see Temperature alarms and
error codes on page 20). Unplug the appliance, wait five minutes, then plug
the appliance back in. If the error code persists, contact consumer care or an
authorized service agent.
CAUTION: Do not try to repair your cooler yourself. Doing so invalidates the
warranty.
PROBLEM SOLUTION
The cooler does not operate. • Make sure that the cooler is plugged in and that the
plug is pushed completely into the outlet.
• Check the house fuse/circuit breaker box and replace
the fuse or reset the circuit breaker.
• If a power failure occurs, the cooler turns off. Wait until
the power is restored, then turn it on again.
The cooler door does not close
completely.
• Adjust the shelf properly.
• Clean the door gaskets.
• Level the cooler with the leveling feet.
The cooler is not cold enough. • Make sure that the door is closed properly.
• Allow time for new beverages to cool, then check
again.
• Set the control to a colder setting.
The cooler makes unusual
noises or vibrates.
• Level the cooler with the leveling feet.
• Move the cooler out from the wall.
• This is normal.
Moisture is building up in the
interior of the cooler.
• Make sure that the door is closed properly.
• Move the cooler to a dryer location.
The cooler turns on and off
frequently.
• Cool the room or move the cooler to a cooler location.
• Make sure that the door is closed properly.
• Clean the door gaskets.
• Set the control to a colder setting.
The display shows an error
code and an alarm sounds
• See Temperature alarms and error codes
on page 20.
Loading ...
Loading ...
Loading ...