Loading ...
Loading ...
Loading ...
10
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone 503.626.1802 | Fax 503.213.5869 | www.evoamerica.com | [email protected]
Parts List
Qty Grill Assembly Components
1 Right Front Leg
1 Left Front Leg
1 Rear Leg
2 Leg Supports
( LP Only )
1 Removable Leg Support ( LP Only )
3 Leg Supports ( Natural Gas Only )
1 Lower Rack
1 Drip Pan
1 Waste Tray
1 Regulator / Hose Assembly
( LP Only )
1 Natural Gas Quick-Disconnect Hose
( Natural Gas Only )
Parts Box
1 Fastener Package
1 Right Wheel Spacer
1 Left Wheel Spacer
2 Wheel
2 Spanner Bushing
2 Wheel Hub Plate
1 Hood Handle
1 Hood Support
1 Rear Grill Handle
2 Hose Clamp and Fasteners
( Natural Gas Only )
1 Electronic Ignitor Battery (AA or AAA)
Tools Included
1 Socket and “L” Handle
1 7/16” Open-End Box Wrench
Tools Required
1 Phillips Screwdriver
1 Hammer
1 Small Block of Wood (Approx. 2” x 4” )
Literature Bag
1 Install Instructions & Owners Manual
1 Use & Care Manual
Qty Key Legs to Lower Rack
6 10 1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
6 11 1/4” - 20 Nyloc Nut - Stainless Steel
Wheels to Lower Rack
2 20 3/8” x 7/8” - Flat Washer - Stainless Steel
2 21 3/8” Nyloc Hex Nut - Stainless Steel
6 22 8 x 3/8” Phillips Screw - Stainless Steel
Leg Supports to Leg Frame
8 30 1/4” - 20 x 1/2” Phillips Screw - Stainless Steel.
Note: On LP models, 8 screws connect two leg supports.
The third removable key-way leg support uses pre-installed
hardware.
12 30 1/4” - 20 x 1/2” Phillips Screw - Stainless Steel.
Note: On Natural Gas models, 12 screws are required for
connecting all three leg supports to leg frame. Removable
leg support not used on Natural Gas models.
8 31 1/4” - 20 Nyloc Nut - Stainless Steel.
Note: On LP models, 8 nyloc nuts are required for connect-
ing all two leg supports to leg frame. The third (right-most
from front of grill) is a removable (keyed) support.
12 31 1/4” - 20 Nyloc Hex Nut - Stainless Steel.
Note: On Natural Gas models, 12 nyloc nuts are required
for connecting all three leg supports to leg frame.
Leg Frame Assembly to Burner Unit
6 40 1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
6 41 1/4” - 20 Nyloc Hex Nut - Stainless Steel
Drip Pan to Burner Unit
3 50 1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
3 51 1/4” - 20 Nyloc Hex Nut - Stainless Steel
Rear Handle to Burner Unit
2 60 1/4” - 20 x 1/2” Phillips Screw - Stainless Steel
2 61 1/4” - 20 Nyloc Hex Nut - Stainless Steel
Hood Handle and Hood Support
2 70 1/4” - 20 x 5/8” Phillips Screw - Stainless Steel
2 71 1/4” Lock Washer
2 72 1/4” - 20 Hex Nut
Natural Gas Hose to Rear Leg
( Natural Gas Only )
2 100 5/8” Stainless Steel Hose Clamps
Screw / Nut Combination Included
You may have extra hardware after completing as-
sembly of your grill. This is normal, as in some cases
we have included extra hardware to ensure you have
enough.
Fastener Package Listed in Order of Assembly Group
Loading ...
Loading ...
Loading ...