Refer to enclosed warranty for operating parameters
to ensure proper use with your water supply.
H2O-DWCFL100
Installation, Operation and
Maintenance Manual
Lead Filtration System
High Capacity, Full Flow, Easy Filter Replacement
Model: H2O-DWCFL100
H2O-DWCFL100 tested and certified
by IAPMO R&T Lab and IAPMO R&T
to meet NSF/ANSI 42 standards for
the reduction of Chlorine, Taste and
Odor, and Class I Particulates; NSF/
ANSI 53 for the reduction of Lead
and Cyst; and NSF/ANSI 372 for low
lead compliance as verified and
substantiated by test data
IOM-WQ-H2O-DWCFL100
WARNING
!
Please read carefully before proceeding with
installation. Your failure to follow any attached
instructions or operating parameters may lead to the
product’s failure.
Keep this Manual for future reference.
WARNING
!
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system.
If you are unsure about installing your WATTS water filter, contact
a WATTS representative or consult a professional plumber.
Test the water periodically to verify that the system is performing
satisfactorily.
Discard small parts remaining after the installation.
Failure to install the system correctly voids the warranty.
Handle all components of the system with care. Do not drop,
drag or turn components upside down.
IMPORTANT
CAUTION
!
NOTICE
Loading ...
Loading ...
Loading ...
