Loading ...
Loading ...
Loading ...
22
VIDEO IN
SPDIF
OUT
AV3
AUDIO IN
VIDEO IN
AV
1
AV2
AUDIO IN
VIDEO IN
DVD / Set-Top Box
conn us entry05 digitalYPbPr.eps
2
SPDIF
OUT
1
AV2 :
YPbPr + L + R
DVD / Set-Top Box
conn us entry05 digitalRGB.eps
AV1 :
YPbPr + L +
R
2
AUDIO IN
VIDEO IN
AV
1
AV
2
AUDIO IN
VIDEO IN
DVD / Set-Top Box
co
nn us entry05 digitalSVIDEO.eps
AV3 :
L + R
2
S-VIDEO
1
VIDEO IN
SPDIF
OU
T
AV
3
YPbPr
RGB
S-VIDEO
DVD Player or other accessory digital source devices
Devices with Component Video Output Connectors (YPbPr)
This TV is capable of displaying 1080i, 720p and 480p DTV signals when
connected to a DTV tuner Set Top Box. Select the output of the Set Top
Box to either 1080i, 720p or 480p. A DTV signal must be available in your
area.
& Connect the three separate component video cables 1 to the device
having component video outputs (YPbPr), such as Set Top Boxes, DVD-
players, laser-disc players, videogame players, satellite receivers or other
equipment, and to the
Y, Pb and Pr jacks of AV2 on the TV.
é In case of a device with digital audio, connect the audio cable 2 to the
DIGITAL AUDIO IN of the device and to the DIGITAL AUDIO OUT(SPDIF
OUT) of the TV.
In case of a device with analog audio, connect the audio cable to the
device’s AUDIO L and R 3 jacks and the L and R audio jacks of AV2.
Devices with RGB output
& Connect the device with RGB output to the Pr/R Pb/B Y/G input 1 jacks.
é Connect the audio cables to the L and R AUDIO jacks of AV1 1.
Devices with an S-Video connector
& Connect an S-Video cable to the AV3 S-VIDEO input 1.
Note: When using the S-VIDEO connector do not connect any device to the AV
VIDEO input that you are using.
é Connect the audio cables to the device’s AUDIO L and R jacks and to
the L and R audio AV3 jacks 2 on the TV accordingly to where you
connected the S-Video cable.
Notes
- If necessary, you can adjust the picture position to the center of the screen with the
cursor keys.
- The labels for the component video sockets may differ depending on the DVD
player or the device connected. Although the abbreviations may vary, the letters B
and R stand for the blue and red component signals, respectively, and Y indicates
the luminance signal. Refer to the DVD player’s or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 720p and 1080i
as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to display properly.
- Due to possible digital image distortion when displaying signals from connected
digital equipment, automatically the Auto picture setting
Soft is selected. See Picture
menu, Auto picture, p. 14.
Changing this setting during reviewing will not be stored as
Personal setting after
switch off.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in the
correct way or move your digital device further away from your TV.
English_DFU_35242.indd 22 2005-11-27 3:30:48 PM
Loading ...
Loading ...
Loading ...