Loading ...
Loading ...
Loading ...
4
Installation- Wall Mount
1
Wall location preparation
□ Select the wall location where you want to hang your
replace.
□ Draw a horizontal line using a level (Figure F)
□ Using the mounting bracket as a guide, mark 4 drill holes
for the 4 anchors (for drywall) or 4 screws (for wood studs).
2
Pre-drill screw
□ Drill 4 holes 8 mm (5/16in) in diameter and 43 mm (1.7in)
deep on the marked locations.
□ For holes that do not hit a stud, use the supplied wall
anchor. Install the wall anchors into the holes and gently
tap them into place with a hammer until the ange of the
wall anchor is ush with the wall surface. See Figure G.
Figure G
Anchor/Screw locations
NOTE: The holes are for mounting the replace. Insure
the horizontal line is level so the heater can be mounted
properly.
Figure F
________B X 4 (or as required)
NOTE: Please maintain at least 36 inches between the air
outlet on the replace and the ceiling.
Loading ...
Loading ...
Loading ...