Karcher 1.513-305.0 Vaccum Cleaner

User Manual - Page 4

For 1.513-305.0.

PDF File Manual, 68 pages, Read Online | Download pdf file

1.513-305.0 photo
Loading ...
Loading ...
Loading ...
4English
detergents, petrol, paint thinner, and
acetone) into the water reservoir as
these substances corrode the mate-
rials used in the device.
Do not immerse the device in water
or other liquids.
Only use the device in containers /
pools that are not filled with water
or other liquids.
Do not use the device with water that
has been combined with detergent,
descaling, aromatic, alcohol, rinse
and/or any other sort of chemicals.
The device may not be operated in
explosive atmospheres.
Do not spray steam in the directio
n
of another person, animal or electri-
cal outlet.
Do not clean over floor electrical out-
lets.
Accessories
become hot during
use-allow to cool down before han-
dling.
Store the device indoors in a cool
,
dry place.
Do not use the steam cleaner to
treat any items of clothing that are
still being worn on the body.
Do not touch any hot areas on th
e
steam cleaner. It is normal for the
steam cleaner to heat up during op-
eration.
Do not overfill the tank. Do not ex-
ceed the maximum filling level.
Do not operate the device without
water in the tank. Always top off with
water when needed.
The steam switch must not
be
locked during the operation.
Allow the device to cool down before
storing.
The device must be placed horizon-
tally on the floor during use.
To prevent electric shock use on
ly
with a grounded outlet. See Ground-
ing Instructions.
WARNING
Risk of scalding.
Only operate the device on even,
horizontal surfaces.
Do not lay the device on its side
during operation.
Do not use the device above head
height or horizontally e.g. to clean
walls, work surfaces or windows.
SAVE THESE IN-
STRUCTIONS
Polarization instructions
To reduce the risk of an electric
shock, the device is fitted with a po-
larized plug (one pin is wider than
the other). This plug only fi
ts into a
polarized socket in one direction.
Rotate the plug if it does not fit fully
into the power socket. If the plug still
does not fit then you must have a
suitable socket installed by a quali-
fied electrician. Never modify or re-
place the plug.
Loading ...
Loading ...
Loading ...