Loading ...
Loading ...
Loading ...
18 English
6. The floor nozzle releases from the
device and can be removed.
7. Store the device safely in a horizon-
tal position.
Carpet glider
The carpet glider is used for freshening
up carpets.
ATTENTION
Beware of damaging the carpet glid-
er and carpet
Contamination on the carpet glider, as
well as heat and moisture penetration,
can result in the carpet being dam-
aged.
Use the carpet glider only with a micro-
fiber floor cloth on the floor nozzle.
Steam clean using only the correct
steam stage when using the carpet
glider (see the display indicator on the
handle, carpet floor covering symbol -
medium steam stage).
Prior to use also check the heat resis-
tance and impact of steam on the car-
pet at an insignificant spot using the
smallest steam volume.
Observe the cleaning instructions from
the carpet manufacturer.
Prior to using the carpet glider, make
sure that the carpet has been vacu-
umed and that stains have been re-
moved.
Prior to use and following operating
pauses, remove any possible water ac-
cumulation (condensate) in the device
by pouring the condensate into a drain
(without floor cleaning cloth / with ac-
cessories).
In order to prevent too much moisten-
ing and to avoid the risk of damage due
to temperature effects, do not direct the
steam continuously onto one spot
(maximum 5 seconds).
Do not use the carpet glider on deep-
pile carpets.
Fastening the carpet glider to the
floor nozzle
1. For fastening the floor cleaning cloth
to the floor nozzle, please refer to
chapter Floor nozzle.
2. Using light pressure, allow the floor
nozzle to slide into the carpet glider
and engage there.
1.
2.
1.
2.
Loading ...
Loading ...
Loading ...