Loading ...
Loading ...
Loading ...
Cleaning and Care
(con’t)
Door Seals
Take care to keep door seals clean so that the doors seal tightly.
Wash seal with a mild detergent and warm water. Rinse
and dry thoroughly after cleaning.
Caution!
The refrigerator should only be powered on after the seals
are completely dry.
Replacing the LED Light
(See page 26 for more details.)
Use the following steps to replace the LED light bulb if necessary:
1.
Unplug the refrigerator from the electrical outlet.
2.
Locate the LED light on the inside of the refrigerator.
3.
Remove the light cover. Insert a tool (tweezers or a screwdriver) along the side
opening of the LED light cover. Pop open the side over the cover, grasp the exposed
side and gently pull towards you to remove the cover and expose the LED light.
4. 4.
Remove LED bulb and insert a new LED bulb.
5.
Replace the light cover.
Replacing the Water Filter
To drink the freshest and cleanest water from your refrigerator,
change the filter on time.
1.
Shut off the water supply.
2.
Remove the Water Filter A by twisting it about 1/4 turn
counter-clockwise.
3.
Pull the Water Filter A from the Filter Holder B .
4. 4.
Empty the Water Filter Tray C and dry around the
Filter Case.
5.
Replace with new Water Filter.
16
Loading ...
Loading ...
Loading ...