Loading ...
Loading ...
Loading ...
6
Assembly Instructions
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Using the pilot holes as a guide, attach one Door Stopper (10) to each Partition Panel (F and G) with
two 15 mm Screws (19) per panel.
3. Securely screw the Cam Bolts (2) into the designated small holes on the Partition Panels (F and G),
Stiles (H and I) and Middle Crossbar (K) using a Phillips screwdriver. DO NOT overtighten the Cam
Bolts.
Loading ...
Loading ...
Loading ...