Loading ...
Loading ...
Loading ...
18
Assembly Instructions
31. Turn the assembled unit over so that its back is facing up.
32. Fasten the Long Firebox Support (L) to the Left and Right Stiles (H and I) by attaching two Mending
Plates (12) at the joints, using two 12 mm Screws (4) per plate.
33. Insert two 25 mm Screws (7) through the countersunk holes on the Left and Right Stiles (H and I) and
screw into the Middle Crossbar (K).
34. Now, go back and tighten all cam locks and screws. Make sure that all the parts are tight and there are
no gaps between the pieces. This will help keep the unit square.
35. Pick up the Middle Back Panel (W) and align the pre-drilled holes against the upper long edge with the
pilot holes on the back stretcher of Top Panel (A). Attach the Middle Back Panel (W) in place using the
provided Washer Head Screws (6).
NOTE: We recommend attaching back panel with the washer head screws at the corners first.
36. Align and attach two Side Back Panels (V) to the mantel base with the provided Washer Head Screws
(6).
Loading ...
Loading ...
Loading ...